Argon40-ArgonOne-Script/README.md

Argon ONE Pi 4 Script

This script for the Argon ONE Pi 4 Raspberry Pi Case was pulled from https://download.argon40.com/argon1.sh.

How to install Argon ONE Pi 4 Power Button & Fan Control

Prerequisites

• Raspberry Pi 4 Model B (2GB, 4GB or 8GB version)
• Raspberry Pi OS (previously called Raspbian) installed on microSD card
• Argon ONE Pi 4 Raspberry Pi Case

Installing

1. Connect to the internet.

2. Open "Terminal" in Raspbian.

3. Type the text below in the "Terminal" to initiate installation of Argon ONE Pi 4 script.

   curl https://download.argon40.com/argon1.sh | bash
   

4. Reboot.

Usage Instructions

Argon ONE Pi 4 Power Button Functions

ARGON ONE PI 4 STATE	ACTION	FUNCTION
OFF	Short Press	Turn ON
ON	Long Press (>= 3 s)	Soft Shutdown and Power Cut
ON	Short Press (< 3 s)	Nothing
ON	Double Tap	Reboot
ON	Long Press (>= 5 s)	Forced Shutdown

Argon ONE Pi 4 Fan Speed

Upon installation of the Argon ONE Pi 4 script by default, the settings of the Argon ONE Pi 4 cooling system are as follows:

CPU TEMP	FAN POWER
55 C	10%
60 C	55%
65 C	100%

However, you may change or configure the FAN to your desired settings by clicking the Argon ONE Pi 4 Config icon on your Desktop.

Or via "Terminal" by typing and following the specified format:

argonone-config

Uninstalling Argon ONE Pi 4 Script

To uninstall the Argon ONE Pi 4 script you may do so by clicking the Argon One Pi 4 Uninstall icon on your Desktop.

You may also remove the script via "Terminal" by typing.

argonone-uninstall

Always reboot after changing any configuration or uninstallation for the revised settings to take effect.

Built With

• Danny Guo / Make a README - The README generator used for README.md
• Adam Pritchard / Markdown Cheatsheet - The Markdown Cheatsheet used for README.md
• PurpleBooth / README-Template.md - The template used for README.md

Acknowledgments

Thanks to Argon Forty for building these great Raspberry Pi Case.