mirror of
https://github.com/okunze/Argon40-ArgonOne-Script.git
synced 2025-11-04 10:50:42 +01:00
Downloaded updated script from Argon 40 / Updating README.md
This commit is contained in:
Oliver Kunze
157
README.md
157
README.md
@@ -1,73 +1,84 @@
|
||||
# Argon ONE Pi 4 Script
|
||||
|
||||
This script for the [Argon ONE Pi 4 Raspberry Pi Case](https://www.argon40.com/argon-one-raspberry-pi-4-case.html "Argon ONE Pi 4 Raspberry Pi Case") was pulled from [https://download.argon40.com/argon1.sh](https://download.argon40.com/argon1.sh).
|
||||
|
||||
## How to install Argon ONE Pi 4 Power Button & Fan Control
|
||||
|
||||
### Prerequisites
|
||||
|
||||
* [Raspberry Pi 4 Model B (2GB, 4GB or 8GB version)](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/ "Raspberry Pi 4 Model B")
|
||||
* [Raspberry Pi OS (previously called Raspbian)](https://www.raspberrypi.org/downloads/ "Raspberry Pi OS") installed on microSD card
|
||||
* [Argon ONE Pi 4 Raspberry Pi Case](https://www.argon40.com/argon-one-raspberry-pi-4-case.html "Argon ONE Pi 4 Raspberry Pi Case")
|
||||
|
||||
### Installing
|
||||
|
||||
1. Connect to the internet.
|
||||
2. Open "Terminal" in Raspbian.
|
||||
3. Type the text below in the "Terminal" to initiate installation of Argon ONE Pi 4 script.
|
||||
|
||||
```
|
||||
curl https://download.argon40.com/argon1.sh | bash
|
||||
```
|
||||
|
||||
4. Reboot.
|
||||
|
||||
## Usage Instructions
|
||||
|
||||
### Argon ONE Pi 4 Power Button Functions
|
||||
|
||||
ARGON ONE PI 4 STATE | ACTION | FUNCTION
|
||||
:------------------: | :----: | :------:
|
||||
OFF | Short Press | Turn ON
|
||||
ON | Long Press (>= 3 s) | Soft Shutdown and Power Cut
|
||||
ON | Short Press (< 3 s) | Nothing
|
||||
ON | Double Tap | Reboot
|
||||
ON | Long Press (>= 5 s) | Forced Shutdown
|
||||
|
||||
### Argon ONE Pi 4 Fan Speed
|
||||
Upon installation of the Argon ONE Pi 4 script by default, the settings of the Argon ONE Pi 4 cooling system are as follows:
|
||||
|
||||
CPU TEMP | FAN POWER
|
||||
:------: | :-------:
|
||||
55 C | 10%
|
||||
60 C | 55%
|
||||
65 C | 100%
|
||||
|
||||
However, you may change or configure the FAN to your desired settings by clicking the Argon ONE Pi 4 Config icon on your Desktop.
|
||||
|
||||
Or via "Terminal" by typing and following the specified format:
|
||||
|
||||
```
|
||||
argonone-config
|
||||
```
|
||||
|
||||
## Uninstalling Argon ONE Pi 4 Script
|
||||
|
||||
To uninstall the Argon ONE Pi 4 script you may do so by clicking the Argon One Pi 4 Uninstall icon on your Desktop.
|
||||
|
||||
You may also remove the script via "Terminal" by typing.
|
||||
```
|
||||
argonone-uninstall
|
||||
```
|
||||
|
||||
Always reboot after changing any configuration or uninstallation for the revised settings to take effect.
|
||||
|
||||
## Built With
|
||||
|
||||
* [Danny Guo / Make a README](https://www.makeareadme.com/ "Make a README") - The README generator used for README.md
|
||||
* [Adam Pritchard / Markdown Cheatsheet](https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet "Markdown Cheatsheet") - The Markdown Cheatsheet used for README.md
|
||||
* [PurpleBooth / README-Template.md](https://gist.github.com/PurpleBooth/109311bb0361f32d87a2 "PurpleBooth / README-Template.md") - The template used for README.md
|
||||
|
||||
## Acknowledgments
|
||||
|
||||
Thanks to [Argon Forty](https://www.argon40.com/) for building these great Raspberry Pi Case.
|
||||
# Argon ONE (V2) Pi 4 Script
|
||||
|
||||
I have been using the [Argon ONE (V2) Case for Raspberry Pi 4](https://www.argon40.com/collections/raspberry-pi-cases "Argon ONE (V2) Case for Raspberry Pi 4") for a long time and I am very happy with it.
|
||||
|
||||
To be able to use the case to the full extent, it is recommended to install the [script](https://download.argon40.com/argon1.sh "https://download.argon40.com/argon1.sh") offered by [Argon 40](https://www.argon40.com "https://www.argon40.com").
|
||||
|
||||
I have saved a copy here along with the instructions to have a copy in case [Argon 40](https://www.argon40.com "https://www.argon40.com") no longer offers it themselves.
|
||||
|
||||
**Just to clarify: I am in no way affiliated with [Argon 40](https://www.argon40.com "https://www.argon40.com"), I only use their cases as an end user.**
|
||||
|
||||
|
||||
You can find them here:
|
||||
* Argon 40 Website: [https://www.argon40.com](https://www.argon40.com "https://www.argon40.com")
|
||||
* Argon 40 Github: [https://github.com/Argon40Tech](https://github.com/Argon40Tech "https://github.com/Argon40Tech")
|
||||
|
||||
## How to install Argon ONE (V2) Pi 4 Power Button & Fan Control
|
||||
|
||||
### Prerequisites
|
||||
|
||||
* [Raspberry Pi 4 Model B (2GB, 4GB or 8GB version)](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/ "Raspberry Pi 4 Model B")
|
||||
* [Raspberry Pi OS (previously called Raspbian)](https://www.raspberrypi.org/downloads/ "Raspberry Pi OS") installed on microSD card
|
||||
* [Argon ONE (V2) Case for Raspberry Pi 4](https://www.argon40.com/collections/raspberry-pi-cases "Argon ONE (V2) Case for Raspberry Pi 4")
|
||||
|
||||
### Installing
|
||||
|
||||
1. Connect to the internet.
|
||||
2. Open "Terminal" in Raspbian.
|
||||
3. Type the text below in the "Terminal" to initiate installation of Argon ONE (V2) Pi 4 script.
|
||||
|
||||
```
|
||||
curl https://download.argon40.com/argon1.sh | bash
|
||||
```
|
||||
|
||||
4. Reboot.
|
||||
|
||||
## Usage Instructions
|
||||
|
||||
### Argon ONE (V2) Pi 4 Power Button Functions
|
||||
|
||||
ARGON ONE (V2) PI 4 STATE | ACTION | FUNCTION
|
||||
:------------------: | :----: | :------:
|
||||
OFF | Short Press | Turn ON
|
||||
ON | Long Press (>= 3 s) | Soft Shutdown and Power Cut
|
||||
ON | Short Press (< 3 s) | Nothing
|
||||
ON | Double Tap | Reboot
|
||||
ON | Long Press (>= 5 s) | Forced Shutdown
|
||||
|
||||
### Argon ONE (V2) Pi 4 Fan Speed
|
||||
Upon installation of the Argon ONE (V2) Pi 4 script by default, the settings of the Argon ONE (V2) Pi 4 cooling system are as follows:
|
||||
|
||||
CPU TEMP | FAN POWER
|
||||
:------: | :-------:
|
||||
55 C | 10%
|
||||
60 C | 55%
|
||||
65 C | 100%
|
||||
|
||||
However, you may change or configure the FAN to your desired settings by clicking the Argon ONE (V2) Pi 4 Config icon on your Desktop.
|
||||
|
||||
Or via "Terminal" by typing and following the specified format:
|
||||
|
||||
```
|
||||
argonone-config
|
||||
```
|
||||
|
||||
## Uninstalling Argon ONE (V2) Pi 4 Script
|
||||
|
||||
To uninstall the Argon ONE (V2) Pi 4 script you may do so by clicking the Argon One (V2) Pi 4 Uninstall icon on your Desktop.
|
||||
|
||||
You may also remove the script via "Terminal" by typing.
|
||||
```
|
||||
argonone-uninstall
|
||||
```
|
||||
|
||||
Always reboot after changing any configuration or uninstallation for the revised settings to take effect.
|
||||
|
||||
## Built With
|
||||
|
||||
* [Danny Guo / Make a README](https://www.makeareadme.com/ "Make a README") - The README generator used for README.md
|
||||
* [Adam Pritchard / Markdown Cheatsheet](https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet "Markdown Cheatsheet") - The Markdown Cheatsheet used for README.md
|
||||
* [PurpleBooth / README-Template.md](https://gist.github.com/PurpleBooth/109311bb0361f32d87a2 "PurpleBooth / README-Template.md") - The template used for README.md
|
||||
|
||||
## Acknowledgments
|
||||
|
||||
Thanks to [Argon 40](https://www.argon40.com "https://www.argon40.com") for building these great Raspberry Pi Cases.
|
||||
|
||||
|
Before Width: | Height: | Size: 117 KiB After Width: | Height: | Size: 117 KiB |
|
Before Width: | Height: | Size: 118 KiB After Width: | Height: | Size: 118 KiB |
@@ -3,22 +3,33 @@
|
||||
|
||||
argon_create_file() {
|
||||
if [ -f $1 ]; then
|
||||
sudo rm $1
|
||||
fi
|
||||
sudo rm $1
|
||||
fi
|
||||
sudo touch $1
|
||||
sudo chmod 666 $1
|
||||
}
|
||||
argon_check_pkg() {
|
||||
RESULT=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "installed")
|
||||
RESULT=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "installed")
|
||||
|
||||
if [ "" == "$RESULT" ]; then
|
||||
echo "NG"
|
||||
else
|
||||
echo "OK"
|
||||
fi
|
||||
if [ "" == "$RESULT" ]; then
|
||||
echo "NG"
|
||||
else
|
||||
echo "OK"
|
||||
fi
|
||||
}
|
||||
|
||||
pkglist=(raspi-gpio python-rpi.gpio python3-rpi.gpio python-smbus python3-smbus i2c-tools)
|
||||
CHECKPLATFORM="Others"
|
||||
# Check if Raspbian, otherwise Ubuntu
|
||||
grep -q -F 'Raspbian' /etc/os-release &> /dev/null
|
||||
if [ $? -eq 0 ]
|
||||
then
|
||||
CHECKPLATFORM="Raspbian"
|
||||
pkglist=(raspi-gpio python3-rpi.gpio python3-smbus i2c-tools)
|
||||
else
|
||||
# Ubuntu has serial and i2c enabled
|
||||
pkglist=(python3-rpi.gpio python3-smbus i2c-tools)
|
||||
fi
|
||||
|
||||
for curpkg in ${pkglist[@]}; do
|
||||
sudo apt-get install -y $curpkg
|
||||
RESULT=$(argon_check_pkg "$curpkg")
|
||||
@@ -31,8 +42,16 @@ for curpkg in ${pkglist[@]}; do
|
||||
fi
|
||||
done
|
||||
|
||||
# Ubuntu Mate for RPi has raspi-config too
|
||||
command -v raspi-config &> /dev/null
|
||||
if [ $? -eq 0 ]
|
||||
then
|
||||
# Enable i2c and serial
|
||||
sudo raspi-config nonint do_i2c 0
|
||||
sudo raspi-config nonint do_serial 2
|
||||
fi
|
||||
|
||||
|
||||
# Helper variables
|
||||
daemonname="argononed"
|
||||
powerbuttonscript=/usr/bin/$daemonname.py
|
||||
shutdownscript="/lib/systemd/system-shutdown/"$daemonname"-poweroff.py"
|
||||
@@ -41,9 +60,6 @@ configscript=/usr/bin/argonone-config
|
||||
removescript=/usr/bin/argonone-uninstall
|
||||
|
||||
daemonfanservice=/lib/systemd/system/$daemonname.service
|
||||
|
||||
sudo raspi-config nonint do_i2c 0
|
||||
sudo raspi-config nonint do_serial 0
|
||||
|
||||
if [ ! -f $daemonconfigfile ]; then
|
||||
# Generate config file for fan speed
|
||||
@@ -77,7 +93,7 @@ fi
|
||||
# Generate script that runs every shutdown event
|
||||
argon_create_file $shutdownscript
|
||||
|
||||
echo "#!/usr/bin/python" >> $shutdownscript
|
||||
echo "#!/usr/bin/python3" >> $shutdownscript
|
||||
echo 'import sys' >> $shutdownscript
|
||||
echo 'import smbus' >> $shutdownscript
|
||||
echo 'import RPi.GPIO as GPIO' >> $shutdownscript
|
||||
@@ -89,18 +105,21 @@ echo ' bus = smbus.SMBus(0)' >> $shutdownscript
|
||||
|
||||
echo 'if len(sys.argv)>1:' >> $shutdownscript
|
||||
echo " bus.write_byte(0x1a,0)" >> $shutdownscript
|
||||
|
||||
# powercut signal
|
||||
echo ' if sys.argv[1] == "poweroff" or sys.argv[1] == "halt":' >> $shutdownscript
|
||||
echo " try:" >> $shutdownscript
|
||||
echo " bus.write_byte(0x1a,0xFF)" >> $shutdownscript
|
||||
echo " except:" >> $shutdownscript
|
||||
echo " rev=0" >> $shutdownscript
|
||||
|
||||
sudo chmod 755 $shutdownscript
|
||||
|
||||
# Generate script to monitor shutdown button
|
||||
|
||||
argon_create_file $powerbuttonscript
|
||||
|
||||
echo "#!/usr/bin/python" >> $powerbuttonscript
|
||||
echo "#!/usr/bin/python3" >> $powerbuttonscript
|
||||
echo 'import smbus' >> $powerbuttonscript
|
||||
echo 'import RPi.GPIO as GPIO' >> $powerbuttonscript
|
||||
echo 'import os' >> $powerbuttonscript
|
||||
@@ -136,6 +155,8 @@ echo ' curpair = curconfig.split("=")' >> $powerbuttonscript
|
||||
echo ' tempcfg = float(curpair[0])' >> $powerbuttonscript
|
||||
echo ' fancfg = int(float(curpair[1]))' >> $powerbuttonscript
|
||||
echo ' if tempval >= tempcfg:' >> $powerbuttonscript
|
||||
echo ' if fancfg < 25:' >> $powerbuttonscript
|
||||
echo ' return 25' >> $powerbuttonscript
|
||||
echo ' return fancfg' >> $powerbuttonscript
|
||||
echo ' return 0' >> $powerbuttonscript
|
||||
|
||||
@@ -183,14 +204,23 @@ echo ' fanconfig = tmpconfig' >> $powerbuttonscript
|
||||
echo ' address=0x1a' >> $powerbuttonscript
|
||||
echo ' prevblock=0' >> $powerbuttonscript
|
||||
echo ' while True:' >> $powerbuttonscript
|
||||
echo ' temp = os.popen("vcgencmd measure_temp").readline()' >> $powerbuttonscript
|
||||
echo ' temp = temp.replace("temp=","")' >> $powerbuttonscript
|
||||
echo ' val = float(temp.replace("'"'"'C",""))' >> $powerbuttonscript
|
||||
|
||||
echo ' try:' >> $powerbuttonscript
|
||||
echo ' tempfp = open("/sys/class/thermal/thermal_zone0/temp", "r")' >> $powerbuttonscript
|
||||
echo ' temp = tempfp.readline()' >> $powerbuttonscript
|
||||
echo ' tempfp.close()' >> $powerbuttonscript
|
||||
echo ' val = float(int(temp)/1000)' >> $powerbuttonscript
|
||||
echo ' except IOError:' >> $powerbuttonscript
|
||||
echo ' val = 0' >> $powerbuttonscript
|
||||
|
||||
echo ' block = get_fanspeed(val, fanconfig)' >> $powerbuttonscript
|
||||
echo ' if block < prevblock:' >> $powerbuttonscript
|
||||
echo ' time.sleep(30)' >> $powerbuttonscript
|
||||
echo ' prevblock = block' >> $powerbuttonscript
|
||||
echo ' try:' >> $powerbuttonscript
|
||||
echo ' if block > 0:' >> $powerbuttonscript
|
||||
echo ' bus.write_byte(address,100)' >> $powerbuttonscript
|
||||
echo ' time.sleep(1)' >> $powerbuttonscript
|
||||
echo ' bus.write_byte(address,block)' >> $powerbuttonscript
|
||||
echo ' except IOError:' >> $powerbuttonscript
|
||||
echo ' temp=""' >> $powerbuttonscript
|
||||
@@ -265,7 +295,7 @@ argon_create_file $configscript
|
||||
|
||||
# Config Script
|
||||
echo '#!/bin/bash' >> $configscript
|
||||
echo 'daemonconfigfile=/etc/'$daemonname'.conf' >> $configscript
|
||||
echo 'daemonconfigfile='$daemonconfigfile >> $configscript
|
||||
echo 'echo "--------------------------------------"' >> $configscript
|
||||
echo 'echo "Argon One Fan Speed Configuration Tool"' >> $configscript
|
||||
echo 'echo "--------------------------------------"' >> $configscript
|
||||
@@ -446,16 +476,23 @@ sudo systemctl enable $daemonname.service
|
||||
|
||||
sudo systemctl start $daemonname.service
|
||||
|
||||
if [ -d "/home/pi/Desktop" ]; then
|
||||
sudo wget http://download.argon40.com/ar1config.png -O /usr/share/pixmaps/ar1config.png
|
||||
sudo wget http://download.argon40.com/ar1uninstall.png -O /usr/share/pixmaps/ar1uninstall.png
|
||||
|
||||
shortcutfile="/home/pi/Desktop/argonone-config.desktop"
|
||||
if [ "$CHECKPLATFORM" = "Raspbian" ] && [ -d "/home/pi/Desktop" ]
|
||||
then
|
||||
terminalcmd="lxterminal --working-directory=/home/pi/ -t"
|
||||
if [ -f "/home/pi/.twisteros.twid" ]
|
||||
then
|
||||
terminalcmd="xfce4-terminal --default-working-directory=/home/pi/ -T"
|
||||
fi
|
||||
sudo wget http://download.argon40.com/ar1config.png -O /usr/share/pixmaps/ar1config.png --quiet
|
||||
sudo wget http://download.argon40.com/ar1uninstall.png -O /usr/share/pixmaps/ar1uninstall.png --quiet
|
||||
# Create Shortcuts
|
||||
shortcutfile="/home/pi/Desktop/argonone-config.desktop"
|
||||
echo "[Desktop Entry]" > $shortcutfile
|
||||
echo "Name=Argon One Configuration" >> $shortcutfile
|
||||
echo "Comment=Argon One Configuration" >> $shortcutfile
|
||||
echo "Icon=/usr/share/pixmaps/ar1config.png" >> $shortcutfile
|
||||
echo 'Exec=lxterminal -t "Argon One Configuration" --working-directory=/home/pi/ -e '$configscript >> $shortcutfile
|
||||
echo 'Exec='$terminalcmd' "Argon One Configuration" -e '$configscript >> $shortcutfile
|
||||
echo "Type=Application" >> $shortcutfile
|
||||
echo "Encoding=UTF-8" >> $shortcutfile
|
||||
echo "Terminal=false" >> $shortcutfile
|
||||
@@ -467,7 +504,7 @@ if [ -d "/home/pi/Desktop" ]; then
|
||||
echo "Name=Argon One Uninstall" >> $shortcutfile
|
||||
echo "Comment=Argon One Uninstall" >> $shortcutfile
|
||||
echo "Icon=/usr/share/pixmaps/ar1uninstall.png" >> $shortcutfile
|
||||
echo 'Exec=lxterminal -t "Argon One Uninstall" --working-directory=/home/pi/ -e '$removescript >> $shortcutfile
|
||||
echo 'Exec='$terminalcmd' -t "Argon One Uninstall" --working-directory=/home/pi/ -e '$removescript >> $shortcutfile
|
||||
echo "Type=Application" >> $shortcutfile
|
||||
echo "Encoding=UTF-8" >> $shortcutfile
|
||||
echo "Terminal=false" >> $shortcutfile
|
||||
@@ -475,15 +512,23 @@ if [ -d "/home/pi/Desktop" ]; then
|
||||
chmod 755 $shortcutfile
|
||||
fi
|
||||
|
||||
# IR config script
|
||||
sudo wget https://download.argon40.com/argonone-irconfig.sh -O /usr/bin/argonone-ir --quiet
|
||||
sudo chmod 755 /usr/bin/argonone-ir
|
||||
|
||||
echo "***************************"
|
||||
echo "Argon One Setup Completed."
|
||||
echo "***************************"
|
||||
echo
|
||||
if [ -d "/home/pi/Desktop" ]; then
|
||||
echo
|
||||
if [ ! "$CHECKPLATFORM" = "Raspbian" ]
|
||||
then
|
||||
echo "You may need to reboot for changes to take effect"
|
||||
echo
|
||||
fi
|
||||
if [ -f $shortcutfile ]; then
|
||||
echo Shortcuts created in your desktop.
|
||||
else
|
||||
echo Use 'argonone-config' to configure fan
|
||||
echo Use 'argonone-uninstall' to uninstall
|
||||
fi
|
||||
echo
|
||||
echo
|
||||
325
source/argonone-irconfig.sh
Normal file
325
source/argonone-irconfig.sh
Normal file
@@ -0,0 +1,325 @@
|
||||
#!/bin/bash
|
||||
|
||||
CHECKPLATFORM="Others"
|
||||
# Check if Raspbian
|
||||
grep -q -F 'Raspbian' /etc/os-release &> /dev/null
|
||||
if [ $? -eq 0 ]
|
||||
then
|
||||
CHECKPLATFORM="Raspbian"
|
||||
fi
|
||||
|
||||
echo "--------------------------------"
|
||||
echo "Argon One IR Configuration Tool"
|
||||
echo "--------------------------------"
|
||||
echo "WARNING: This only supports NEC"
|
||||
echo " protocol only."
|
||||
echo -n "Press Y to continue:"
|
||||
read -n 1 confirm
|
||||
echo
|
||||
|
||||
if [ "$confirm" = "y" ]
|
||||
then
|
||||
confirm="Y"
|
||||
fi
|
||||
|
||||
if [ "$confirm" != "Y" ]
|
||||
then
|
||||
echo "Cancelled"
|
||||
exit
|
||||
fi
|
||||
echo "Thank you."
|
||||
|
||||
get_number () {
|
||||
read curnumber
|
||||
if [ -z "$curnumber" ]
|
||||
then
|
||||
echo "-2"
|
||||
return
|
||||
elif [[ $curnumber =~ ^[+-]?[0-9]+$ ]]
|
||||
then
|
||||
if [ $curnumber -lt 0 ]
|
||||
then
|
||||
echo "-1"
|
||||
return
|
||||
elif [ $curnumber -gt 100 ]
|
||||
then
|
||||
echo "-1"
|
||||
return
|
||||
fi
|
||||
echo $curnumber
|
||||
return
|
||||
fi
|
||||
echo "-1"
|
||||
return
|
||||
}
|
||||
|
||||
irexecrcfile=/etc/lirc/irexec.lircrc
|
||||
irexecshfile=/usr/bin/argonirexec
|
||||
irdecodefile=/usr/bin/argonirdecoder
|
||||
kodiuserdatafolder="$HOME/.kodi/userdata"
|
||||
kodilircmapfile="$kodiuserdatafolder/Lircmap.xml"
|
||||
remotemode=""
|
||||
needinstallation=0
|
||||
|
||||
loopflag=1
|
||||
while [ $loopflag -eq 1 ]
|
||||
do
|
||||
echo
|
||||
echo "Select remote control to configure:"
|
||||
echo " 1. Configure Remote ON/OFF Button"
|
||||
if [ "$CHECKPLATFORM" = "Raspbian" ]
|
||||
then
|
||||
echo " 2. Configure Other Remote Buttons"
|
||||
if [ ! -f "$irexecshfile" ]
|
||||
then
|
||||
echo " 3. Cancel"
|
||||
echo -n "Enter Number (1-3):"
|
||||
|
||||
newmode=$( get_number )
|
||||
if [[ $newmode -ge 1 && $newmode -le 3 ]]
|
||||
then
|
||||
loopflag=0
|
||||
if [ $newmode -eq 3 ]
|
||||
then
|
||||
newmode=4
|
||||
fi
|
||||
fi
|
||||
|
||||
else
|
||||
echo " 3. Uninstall Other Remote Buttons"
|
||||
echo " 4. Cancel"
|
||||
echo -n "Enter Number (1-4):"
|
||||
newmode=$( get_number )
|
||||
if [[ $newmode -ge 1 && $newmode -le 4 ]]
|
||||
then
|
||||
loopflag=0
|
||||
fi
|
||||
fi
|
||||
else
|
||||
echo " 2. Cancel"
|
||||
echo -n "Enter Number (1-2):"
|
||||
|
||||
newmode=$( get_number )
|
||||
if [[ $newmode -ge 1 && $newmode -le 2 ]]
|
||||
then
|
||||
loopflag=0
|
||||
if [ $newmode -eq 2 ]
|
||||
then
|
||||
newmode=4
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
done
|
||||
|
||||
|
||||
echo
|
||||
if [ $newmode -eq 3 ]
|
||||
then
|
||||
irtmpconfigfile=/dev/shm/argonirconfig.txt
|
||||
sudo systemctl stop irexec.service
|
||||
sudo systemctl disable irexec.service
|
||||
sudo pip3 uninstall lirc -y
|
||||
sudo apt-get -y remove lirc
|
||||
sudo rm $irexecshfile
|
||||
sudo rm $irdecodefile
|
||||
|
||||
sudo cat /boot/config.txt | grep -v 'dtoverlay=gpio-ir,gpio_pin=23' > $irtmpconfigfile
|
||||
cat $irtmpconfigfile | sudo tee /boot/config.txt 1> /dev/null
|
||||
sudo rm $irtmpconfigfile
|
||||
|
||||
echo "Uninstall Completed"
|
||||
echo "Please reboot for changes to take effect"
|
||||
exit
|
||||
elif [ $newmode -eq 1 ]
|
||||
then
|
||||
loopflag=1
|
||||
while [ $loopflag -eq 1 ]
|
||||
do
|
||||
echo
|
||||
echo "Select remote control to configure:"
|
||||
echo " 1. Use Argon Remote ON/OFF Button"
|
||||
echo " 2. Use Custom Remote ON/OFF Button"
|
||||
echo " 3. Cancel"
|
||||
echo -n "Enter Number (1-3):"
|
||||
newmode=$( get_number )
|
||||
if [[ $newmode -ge 1 && $newmode -le 4 ]]
|
||||
then
|
||||
loopflag=0
|
||||
fi
|
||||
done
|
||||
|
||||
if [ $newmode -eq 3 ]
|
||||
then
|
||||
echo "Cancelled"
|
||||
exit
|
||||
elif [ $newmode -eq 1 ]
|
||||
then
|
||||
remotemode="resetpower"
|
||||
elif [ $newmode -eq 2 ]
|
||||
then
|
||||
remotemode="power"
|
||||
fi
|
||||
elif [ $newmode -eq 2 ]
|
||||
then
|
||||
echo "--------------------------------"
|
||||
echo "Argon One IR Configuration Tool"
|
||||
echo "--------------------------------"
|
||||
echo "WARNING: This will install LIRC"
|
||||
echo " and related libraries."
|
||||
echo -n "Press Y to agree:"
|
||||
read -n 1 confirm
|
||||
echo
|
||||
|
||||
if [ "$confirm" = "y" ]
|
||||
then
|
||||
confirm="Y"
|
||||
fi
|
||||
|
||||
if [ "$confirm" != "Y" ]
|
||||
then
|
||||
echo "Cancelled"
|
||||
exit
|
||||
fi
|
||||
echo "Thank you."
|
||||
|
||||
|
||||
needinstallation=1
|
||||
loopflag=1
|
||||
while [ $loopflag -eq 1 ]
|
||||
do
|
||||
echo
|
||||
echo "Select remote control to configure:"
|
||||
echo " 1. Use Argon Remote Buttons"
|
||||
echo " 2. Use Custom Remote Buttons"
|
||||
echo " 3. Cancel"
|
||||
echo -n "Enter Number (1-3):"
|
||||
newmode=$( get_number )
|
||||
if [[ $newmode -ge 1 && $newmode -le 4 ]]
|
||||
then
|
||||
loopflag=0
|
||||
fi
|
||||
done
|
||||
|
||||
if [ $newmode -eq 3 ]
|
||||
then
|
||||
echo "Cancelled"
|
||||
exit
|
||||
elif [ $newmode -eq 1 ]
|
||||
then
|
||||
remotemode="default"
|
||||
elif [ $newmode -eq 2 ]
|
||||
then
|
||||
remotemode="custom"
|
||||
fi
|
||||
else
|
||||
echo "Cancelled"
|
||||
exit
|
||||
fi
|
||||
|
||||
needrestart=0
|
||||
if [ $needinstallation -eq 1 ]
|
||||
then
|
||||
if [ ! -f "$irexecshfile" ]
|
||||
then
|
||||
needrestart=1
|
||||
sudo apt-get -y update
|
||||
sudo apt-get -y install lirc
|
||||
|
||||
sudo pip3 install lirc
|
||||
|
||||
echo "dtoverlay=gpio-ir,gpio_pin=23" | sudo tee -a /boot/config.txt 1> /dev/null
|
||||
|
||||
sudo /usr/share/lirc/lirc-old2new
|
||||
|
||||
sudo systemctl daemon-reload
|
||||
sudo systemctl enable irexec.service
|
||||
sudo systemctl start irexec.service
|
||||
|
||||
echo "" | sudo tee $irexecrcfile 1> /dev/null
|
||||
for keyname in UP DOWN LEFT RIGHT BACK PLAYPAUSE MENU HOME OK MUTE VOLUMEUP VOLUMEDOWN
|
||||
do
|
||||
echo 'begin' | sudo tee -a $irexecrcfile 1> /dev/null
|
||||
echo ' remote=argon' | sudo tee -a $irexecrcfile 1> /dev/null
|
||||
echo ' prog=irexec' | sudo tee -a $irexecrcfile 1> /dev/null
|
||||
echo ' button=KEY_'$keyname | sudo tee -a $irexecrcfile 1> /dev/null
|
||||
echo ' config='$irexecshfile' "'$keyname'"' | sudo tee -a $irexecrcfile 1> /dev/null
|
||||
echo 'end' | sudo tee -a $irexecrcfile 1> /dev/null
|
||||
done
|
||||
|
||||
|
||||
echo "#!/bin/bash" | sudo tee $irexecshfile 1> /dev/null
|
||||
|
||||
echo '' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'if [ -z "$1" ]' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo ' exit' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'fi' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
|
||||
echo '' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
|
||||
echo '# Handlers for different key codes' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo '# Key codes: UP DOWN LEFT RIGHT BACK PLAYPAUSE MENU HOME OK MUTE VOLUMEUP VOLUMEDOWN' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo '' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
|
||||
echo 'amixerdevice=$(/usr/bin/amixer scontrols | sed -n "s/^.*'"'\(.*\)'"'.*$/\1/p")' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'if [ $1 == "VOLUMEUP" ]' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo ' /usr/bin/amixer set $amixerdevice -- $[$(/usr/bin/amixer get $amixerdevice|grep -o [0-9]*%|sed '"'s/%//'"')+5]%' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'elif [ $1 == "VOLUMEDOWN" ]' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo ' /usr/bin/amixer set $amixerdevice -- $[$(/usr/bin/amixer get $amixerdevice|grep -o [0-9]*%|sed '"'s/%//'"')-5]%' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'elif [ $1 == "MUTE" ]' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo ' /usr/bin/amixer set $amixerdevice toggle' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
echo 'fi' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
|
||||
echo '' | sudo tee -a $irexecshfile 1> /dev/null
|
||||
|
||||
sudo chmod 755 $irexecshfile
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ ! -f "$irdecodefile" ]
|
||||
then
|
||||
sudo wget https://download.argon40.com/argonone-irdecoder.py -O $irdecodefile --quiet
|
||||
fi
|
||||
|
||||
sudo python3 $irdecodefile $remotemode
|
||||
|
||||
if [ ! -d $kodiuserdatafolder ]
|
||||
then
|
||||
if [ ! -d "$HOME/.kodi" ]
|
||||
then
|
||||
mkdir "$HOME/.kodi"
|
||||
fi
|
||||
mkdir $kodiuserdatafolder
|
||||
fi
|
||||
|
||||
if [ -d $kodiuserdatafolder ]
|
||||
then
|
||||
echo "<lircmap>" | tee $kodilircmapfile 1> /dev/null
|
||||
echo ' <remote device="argon">' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <left>KEY_LEFT</left>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <right>KEY_RIGHT</right>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <up>KEY_UP</up>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <down>KEY_DOWN</down>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <select>KEY_OK</select>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <start>KEY_HOME</start>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <rootmenu>KEY_MENUBACK</rootmenu>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <volumeplus>KEY_VOLUMEUP</volumeplus>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' <volumeminus>KEY_VOLUMEDOWN</volumeminus>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo ' </remote>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
echo '</lircmap>' | tee -a $kodilircmapfile 1> /dev/null
|
||||
fi
|
||||
|
||||
echo
|
||||
echo "Thank you."
|
||||
if [ $needrestart -eq 1 ]
|
||||
then
|
||||
echo "Changes should take after reboot."
|
||||
elif [ $needinstallation -eq 1 ]
|
||||
then
|
||||
sudo systemctl restart lircd.service
|
||||
sudo systemctl restart irexec.service
|
||||
fi
|
||||
|
||||
1
source/downloaded.txt
Normal file
1
source/downloaded.txt
Normal file
@@ -0,0 +1 @@
|
||||
Files downloaded on: 2022-04-06
|
||||
Reference in New Issue
Block a user