commit f62ae2f6ce7807062d40642bc5aea618adde5c86
Author: Oliver Kunze <oliver@oliver-kunze.de>
Date:   Sun Jun 14 15:08:32 2020 +0200

    Initial commit

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..dfe54bb
--- /dev/null
+++ b/README.md
@@ -0,0 +1,73 @@
+# Argon ONE Pi 4 Script
+
+This script for the [Argon ONE Pi 4 Raspberry Pi Case](https://www.argon40.com/argon-one-raspberry-pi-4-case.html "Argon ONE Pi 4 Raspberry Pi Case") was pulled from [https://download.argon40.com/argon1.sh](https://download.argon40.com/argon1.sh).
+
+## How to install Argon ONE Pi 4 Power Button & Fan Control
+
+### Prerequisites
+
+* [Raspberry Pi 4 Model B (2GB, 4GB or 8GB version)](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/ "Raspberry Pi 4 Model B")
+* [Raspberry Pi OS (previously called Raspbian)](https://www.raspberrypi.org/downloads/ "Raspberry Pi OS") installed on microSD card
+* [Argon ONE Pi 4 Raspberry Pi Case](https://www.argon40.com/argon-one-raspberry-pi-4-case.html "Argon ONE Pi 4 Raspberry Pi Case")
+
+### Installing
+
+1. Connect to the internet.
+2. Open "Terminal" in Raspbian.
+3. Type the text below in the "Terminal" to initiate installation of Argon ONE Pi 4 script.
+
+   ```
+   curl https://download.argon40.com/argon1.sh | bash
+   ```
+
+4. Reboot.
+
+## Usage Instructions
+
+### Argon ONE Pi 4 Power Button Functions
+
+ARGON ONE PI 4 STATE | ACTION | FUNCTION
+:------------------: | :----: | :------:
+OFF | Short Press | Turn ON
+ON | Long Press (>= 3 s) | Soft Shutdown and Power Cut
+ON | Short Press (< 3 s) | Nothing
+ON | Double Tap | Reboot
+ON | Long Press (>= 5 s) | Forced Shutdown
+
+### Argon ONE Pi 4 Fan Speed
+Upon installation of the Argon ONE Pi 4 script by default, the settings of the Argon ONE Pi 4 cooling system are as follows:
+
+CPU TEMP | FAN POWER
+:------: | :-------:
+55 C | 10%
+60 C | 55%
+65 C | 100%
+
+However, you may change or configure the FAN to your desired settings by clicking the Argon ONE Pi 4 Config icon on your Desktop.
+
+Or via "Terminal" by typing and following the specified format:
+
+```
+argonone-config
+```
+
+## Uninstalling Argon ONE Pi 4 Script
+
+To uninstall the Argon ONE Pi 4 script you may do so by clicking the Argon One Pi 4 Uninstall icon on your Desktop.
+
+You may also remove the script via "Terminal" by typing.
+```
+argonone-uninstall
+```
+
+Always reboot after changing any configuration or uninstallation for the revised settings to take effect. 
+
+## Built With
+
+* [Danny Guo / Make a README](https://www.makeareadme.com/ "Make a README") - The README generator used for README.md
+* [Adam Pritchard / Markdown Cheatsheet](https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet "Markdown Cheatsheet") - The Markdown Cheatsheet used for README.md
+* [PurpleBooth / README-Template.md](https://gist.github.com/PurpleBooth/109311bb0361f32d87a2 "PurpleBooth / README-Template.md") - The template used for README.md
+
+## Acknowledgments
+
+Thanks to [Argon Forty](https://www.argon40.com/) for building these great Raspberry Pi Case.
diff --git a/ar1config.png b/ar1config.png
new file mode 100644
index 0000000..846055c
Binary files /dev/null and b/ar1config.png differ
diff --git a/ar1uninstall.png b/ar1uninstall.png
new file mode 100644
index 0000000..2232b6f
Binary files /dev/null and b/ar1uninstall.png differ
diff --git a/argon1.sh b/argon1.sh
new file mode 100644
index 0000000..f99bd81
--- /dev/null
+++ b/argon1.sh
@@ -0,0 +1,489 @@
+#!/bin/bash
+
+
+argon_create_file() {
+	if [ -f $1 ]; then
+        sudo rm $1
+    fi
+	sudo touch $1
+	sudo chmod 666 $1
+}
+argon_check_pkg() {
+    RESULT=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "installed")
+
+    if [ "" == "$RESULT" ]; then
+        echo "NG"
+    else
+        echo "OK"
+    fi
+}
+
+pkglist=(raspi-gpio python-rpi.gpio python3-rpi.gpio python-smbus python3-smbus i2c-tools)
+for curpkg in ${pkglist[@]}; do
+	sudo apt-get install -y $curpkg
+	RESULT=$(argon_check_pkg "$curpkg")
+	if [ "NG" == "$RESULT" ]
+	then
+		echo "********************************************************************"
+		echo "Please also connect device to the internet and restart installation."
+		echo "********************************************************************"
+		exit
+	fi
+done
+
+
+
+daemonname="argononed"
+powerbuttonscript=/usr/bin/$daemonname.py
+shutdownscript="/lib/systemd/system-shutdown/"$daemonname"-poweroff.py"
+daemonconfigfile=/etc/$daemonname.conf
+configscript=/usr/bin/argonone-config
+removescript=/usr/bin/argonone-uninstall
+
+daemonfanservice=/lib/systemd/system/$daemonname.service
+
+sudo raspi-config nonint do_i2c 0
+sudo raspi-config nonint do_serial 0	
+	
+if [ ! -f $daemonconfigfile ]; then
+	# Generate config file for fan speed
+	sudo touch $daemonconfigfile
+	sudo chmod 666 $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# Argon One Fan Configuration' >> $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# List below the temperature (Celsius) and fan speed (in percent) pairs' >> $daemonconfigfile
+	echo '# Use the following form:' >> $daemonconfigfile
+	echo '# min.temperature=speed' >> $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# Example:' >> $daemonconfigfile
+	echo '# 55=10' >> $daemonconfigfile
+	echo '# 60=55' >> $daemonconfigfile
+	echo '# 65=100' >> $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# Above example sets the fan speed to' >> $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# NOTE: Lines begining with # are ignored' >> $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# Type the following at the command line for changes to take effect:' >> $daemonconfigfile
+	echo '# sudo systemctl restart '$daemonname'.service' >> $daemonconfigfile
+	echo '#' >> $daemonconfigfile
+	echo '# Start below:' >> $daemonconfigfile
+	echo '55=10' >> $daemonconfigfile
+	echo '60=55' >> $daemonconfigfile
+	echo '65=100' >> $daemonconfigfile
+fi
+
+# Generate script that runs every shutdown event
+argon_create_file $shutdownscript
+
+echo "#!/usr/bin/python" >> $shutdownscript
+echo 'import sys' >> $shutdownscript
+echo 'import smbus' >> $shutdownscript
+echo 'import RPi.GPIO as GPIO' >> $shutdownscript
+echo 'rev = GPIO.RPI_REVISION' >> $shutdownscript
+echo 'if rev == 2 or rev == 3:' >> $shutdownscript
+echo '	bus = smbus.SMBus(1)' >> $shutdownscript
+echo 'else:' >> $shutdownscript
+echo '	bus = smbus.SMBus(0)' >> $shutdownscript
+
+echo 'if len(sys.argv)>1:' >> $shutdownscript
+echo "	bus.write_byte(0x1a,0)"  >> $shutdownscript
+echo '	if sys.argv[1] == "poweroff" or sys.argv[1] == "halt":'  >> $shutdownscript
+echo "		try:"  >> $shutdownscript
+echo "			bus.write_byte(0x1a,0xFF)"  >> $shutdownscript
+echo "		except:"  >> $shutdownscript
+echo "			rev=0"  >> $shutdownscript
+sudo chmod 755 $shutdownscript
+
+# Generate script to monitor shutdown button
+
+argon_create_file $powerbuttonscript
+
+echo "#!/usr/bin/python" >> $powerbuttonscript
+echo 'import smbus' >> $powerbuttonscript
+echo 'import RPi.GPIO as GPIO' >> $powerbuttonscript
+echo 'import os' >> $powerbuttonscript
+echo 'import time' >> $powerbuttonscript
+echo 'from threading import Thread' >> $powerbuttonscript
+echo 'rev = GPIO.RPI_REVISION' >> $powerbuttonscript
+echo 'if rev == 2 or rev == 3:' >> $powerbuttonscript
+echo '	bus = smbus.SMBus(1)' >> $powerbuttonscript
+echo 'else:' >> $powerbuttonscript
+echo '	bus = smbus.SMBus(0)' >> $powerbuttonscript
+
+echo 'GPIO.setwarnings(False)' >> $powerbuttonscript
+echo 'GPIO.setmode(GPIO.BCM)' >> $powerbuttonscript
+echo 'shutdown_pin=4' >> $powerbuttonscript
+echo 'GPIO.setup(shutdown_pin, GPIO.IN,  pull_up_down=GPIO.PUD_DOWN)' >> $powerbuttonscript
+
+echo 'def shutdown_check():' >> $powerbuttonscript
+echo '	while True:' >> $powerbuttonscript
+echo '		pulsetime = 1' >> $powerbuttonscript
+echo '		GPIO.wait_for_edge(shutdown_pin, GPIO.RISING)' >> $powerbuttonscript
+echo '		time.sleep(0.01)' >> $powerbuttonscript
+echo '		while GPIO.input(shutdown_pin) == GPIO.HIGH:' >> $powerbuttonscript
+echo '			time.sleep(0.01)' >> $powerbuttonscript
+echo '			pulsetime += 1' >> $powerbuttonscript
+echo '		if pulsetime >=2 and pulsetime <=3:' >> $powerbuttonscript
+echo '			os.system("reboot")' >> $powerbuttonscript
+echo '		elif pulsetime >=4 and pulsetime <=5:' >> $powerbuttonscript
+echo '			os.system("shutdown now -h")' >> $powerbuttonscript
+
+echo 'def get_fanspeed(tempval, configlist):' >> $powerbuttonscript
+echo '	for curconfig in configlist:' >> $powerbuttonscript
+echo '		curpair = curconfig.split("=")' >> $powerbuttonscript
+echo '		tempcfg = float(curpair[0])' >> $powerbuttonscript
+echo '		fancfg = int(float(curpair[1]))' >> $powerbuttonscript
+echo '		if tempval >= tempcfg:' >> $powerbuttonscript
+echo '			return fancfg' >> $powerbuttonscript
+echo '	return 0' >> $powerbuttonscript
+
+echo 'def load_config(fname):' >> $powerbuttonscript
+echo '	newconfig = []' >> $powerbuttonscript
+echo '	try:' >> $powerbuttonscript
+echo '		with open(fname, "r") as fp:' >> $powerbuttonscript
+echo '			for curline in fp:' >> $powerbuttonscript
+echo '				if not curline:' >> $powerbuttonscript
+echo '					continue' >> $powerbuttonscript
+echo '				tmpline = curline.strip()' >> $powerbuttonscript
+echo '				if not tmpline:' >> $powerbuttonscript
+echo '					continue' >> $powerbuttonscript
+echo '				if tmpline[0] == "#":' >> $powerbuttonscript
+echo '					continue' >> $powerbuttonscript
+echo '				tmppair = tmpline.split("=")' >> $powerbuttonscript
+echo '				if len(tmppair) != 2:' >> $powerbuttonscript
+echo '					continue' >> $powerbuttonscript
+echo '				tempval = 0' >> $powerbuttonscript
+echo '				fanval = 0' >> $powerbuttonscript
+echo '				try:' >> $powerbuttonscript
+echo '					tempval = float(tmppair[0])' >> $powerbuttonscript
+echo '					if tempval < 0 or tempval > 100:' >> $powerbuttonscript
+echo '						continue' >> $powerbuttonscript
+echo '				except:' >> $powerbuttonscript
+echo '					continue' >> $powerbuttonscript
+echo '				try:' >> $powerbuttonscript
+echo '					fanval = int(float(tmppair[1]))' >> $powerbuttonscript
+echo '					if fanval < 0 or fanval > 100:' >> $powerbuttonscript
+echo '						continue' >> $powerbuttonscript
+echo '				except:' >> $powerbuttonscript
+echo '					continue' >> $powerbuttonscript
+echo '				newconfig.append( "{:5.1f}={}".format(tempval,fanval))' >> $powerbuttonscript
+echo '		if len(newconfig) > 0:' >> $powerbuttonscript
+echo '			newconfig.sort(reverse=True)' >> $powerbuttonscript
+echo '	except:' >> $powerbuttonscript
+echo '		return []' >> $powerbuttonscript
+echo '	return newconfig' >> $powerbuttonscript
+
+echo 'def temp_check():' >> $powerbuttonscript
+echo '	fanconfig = ["65=100", "60=55", "55=10"]' >> $powerbuttonscript
+echo '	tmpconfig = load_config("'$daemonconfigfile'")' >> $powerbuttonscript
+echo '	if len(tmpconfig) > 0:' >> $powerbuttonscript
+echo '		fanconfig = tmpconfig' >> $powerbuttonscript
+echo '	address=0x1a' >> $powerbuttonscript
+echo '	prevblock=0' >> $powerbuttonscript
+echo '	while True:' >> $powerbuttonscript
+echo '		temp = os.popen("vcgencmd measure_temp").readline()' >> $powerbuttonscript
+echo '		temp = temp.replace("temp=","")' >> $powerbuttonscript
+echo '		val = float(temp.replace("'"'"'C",""))' >> $powerbuttonscript
+echo '		block = get_fanspeed(val, fanconfig)' >> $powerbuttonscript
+echo '		if block < prevblock:' >> $powerbuttonscript
+echo '			time.sleep(30)' >> $powerbuttonscript
+echo '		prevblock = block' >> $powerbuttonscript
+echo '		try:' >> $powerbuttonscript
+echo '			bus.write_byte(address,block)' >> $powerbuttonscript
+echo '		except IOError:' >> $powerbuttonscript
+echo '			temp=""' >> $powerbuttonscript
+echo '		time.sleep(30)' >> $powerbuttonscript
+
+echo 'try:' >> $powerbuttonscript
+echo '	t1 = Thread(target = shutdown_check)' >> $powerbuttonscript
+echo '	t2 = Thread(target = temp_check)' >> $powerbuttonscript
+echo '	t1.start()' >> $powerbuttonscript
+echo '	t2.start()' >> $powerbuttonscript
+echo 'except:' >> $powerbuttonscript
+echo '	t1.stop()' >> $powerbuttonscript
+echo '	t2.stop()' >> $powerbuttonscript
+echo '	GPIO.cleanup()' >> $powerbuttonscript
+
+sudo chmod 755 $powerbuttonscript
+
+argon_create_file $daemonfanservice
+
+# Fan Daemon
+echo "[Unit]" >> $daemonfanservice
+echo "Description=Argon One Fan and Button Service" >> $daemonfanservice
+echo "After=multi-user.target" >> $daemonfanservice
+echo '[Service]' >> $daemonfanservice
+echo 'Type=simple' >> $daemonfanservice
+echo "Restart=always" >> $daemonfanservice
+echo "RemainAfterExit=true" >> $daemonfanservice
+echo "ExecStart=/usr/bin/python3 $powerbuttonscript" >> $daemonfanservice
+echo '[Install]' >> $daemonfanservice
+echo "WantedBy=multi-user.target" >> $daemonfanservice
+
+sudo chmod 644 $daemonfanservice
+
+argon_create_file $removescript
+
+# Uninstall Script
+echo '#!/bin/bash' >> $removescript
+echo 'echo "-------------------------"' >> $removescript
+echo 'echo "Argon One Uninstall Tool"' >> $removescript
+echo 'echo "-------------------------"' >> $removescript
+echo 'echo -n "Press Y to continue:"' >> $removescript
+echo 'read -n 1 confirm' >> $removescript
+echo 'echo' >> $removescript
+echo 'if [ "$confirm" = "y" ]' >> $removescript
+echo 'then' >> $removescript
+echo '	confirm="Y"' >> $removescript
+echo 'fi' >> $removescript
+echo '' >> $removescript
+echo 'if [ "$confirm" != "Y" ]' >> $removescript
+echo 'then' >> $removescript
+echo '	echo "Cancelled"' >> $removescript
+echo '	exit' >> $removescript
+echo 'fi' >> $removescript
+echo 'if [ -d "/home/pi/Desktop" ]; then' >> $removescript
+echo '	sudo rm "/home/pi/Desktop/argonone-config.desktop"' >> $removescript
+echo '	sudo rm "/home/pi/Desktop/argonone-uninstall.desktop"' >> $removescript
+echo 'fi' >> $removescript
+echo 'if [ -f '$powerbuttonscript' ]; then' >> $removescript
+echo '	sudo systemctl stop '$daemonname'.service' >> $removescript
+echo '	sudo systemctl disable '$daemonname'.service' >> $removescript
+echo '	sudo /usr/bin/python3 '$shutdownscript' uninstall' >> $removescript
+echo '	sudo rm '$powerbuttonscript >> $removescript
+echo '	sudo rm '$shutdownscript >> $removescript
+echo '	sudo rm '$removescript >> $removescript
+echo '	echo "Removed Argon One Services."' >> $removescript
+echo '	echo "Cleanup will complete after restarting the device."' >> $removescript
+echo 'fi' >> $removescript
+
+sudo chmod 755 $removescript
+
+argon_create_file $configscript
+
+# Config Script
+echo '#!/bin/bash' >> $configscript
+echo 'daemonconfigfile=/etc/'$daemonname'.conf' >> $configscript
+echo 'echo "--------------------------------------"' >> $configscript
+echo 'echo "Argon One Fan Speed Configuration Tool"' >> $configscript
+echo 'echo "--------------------------------------"' >> $configscript
+echo 'echo "WARNING: This will remove existing configuration."' >> $configscript
+echo 'echo -n "Press Y to continue:"' >> $configscript
+echo 'read -n 1 confirm' >> $configscript
+echo 'echo' >> $configscript
+echo 'if [ "$confirm" = "y" ]' >> $configscript
+echo 'then' >> $configscript
+echo '	confirm="Y"' >> $configscript
+echo 'fi' >> $configscript
+echo '' >> $configscript
+echo 'if [ "$confirm" != "Y" ]' >> $configscript
+echo 'then' >> $configscript
+echo '	echo "Cancelled"' >> $configscript
+echo '	exit' >> $configscript
+echo 'fi' >> $configscript
+echo 'echo "Thank you."' >> $configscript
+
+echo 'get_number () {' >> $configscript
+echo '	read curnumber' >> $configscript
+echo '	re="^[0-9]+$"' >> $configscript
+echo '	if [ -z "$curnumber" ]' >> $configscript
+echo '	then' >> $configscript
+echo '		echo "-2"' >> $configscript
+echo '		return' >> $configscript
+echo '	elif [[ $curnumber =~ ^[+-]?[0-9]+$ ]]' >> $configscript
+echo '	then' >> $configscript
+echo '		if [ $curnumber -lt 0 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			echo "-1"' >> $configscript
+echo '			return' >> $configscript
+echo '		elif [ $curnumber -gt 100 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			echo "-1"' >> $configscript
+echo '			return' >> $configscript
+echo '		fi	' >> $configscript
+echo '		echo $curnumber' >> $configscript
+echo '		return' >> $configscript
+echo '	fi' >> $configscript
+echo '	echo "-1"' >> $configscript
+echo '	return' >> $configscript
+echo '}' >> $configscript
+echo '' >> $configscript
+
+echo 'loopflag=1' >> $configscript
+echo 'while [ $loopflag -eq 1 ]' >> $configscript
+echo 'do' >> $configscript
+echo '	echo' >> $configscript
+echo '	echo "Select fan mode:"' >> $configscript
+echo '	echo "  1. Always on"' >> $configscript
+echo '	echo "  2. Adjust to temperatures (55C, 60C, and 65C)"' >> $configscript
+echo '	echo "  3. Customize behavior"' >> $configscript
+echo '	echo "  4. Cancel"' >> $configscript
+echo '	echo "NOTE: You can also edit $daemonconfigfile directly"' >> $configscript
+echo '	echo -n "Enter Number (1-4):"' >> $configscript
+echo '	newmode=$( get_number )' >> $configscript
+echo '	if [[ $newmode -ge 1 && $newmode -le 4 ]]' >> $configscript
+echo '	then' >> $configscript
+echo '		loopflag=0' >> $configscript
+echo '	fi' >> $configscript
+echo 'done' >> $configscript
+
+echo 'echo' >> $configscript
+echo 'if [ $newmode -eq 4 ]' >> $configscript
+echo 'then' >> $configscript
+echo '	echo "Cancelled"' >> $configscript
+echo '	exit' >> $configscript
+echo 'elif [ $newmode -eq 1 ]' >> $configscript
+echo 'then' >> $configscript
+echo '	echo "#" > $daemonconfigfile' >> $configscript
+echo '	echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
+echo '	echo "#" >> $daemonconfigfile' >> $configscript
+echo '	echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
+echo '	echo 1"="100 >> $daemonconfigfile' >> $configscript
+echo '	sudo systemctl restart '$daemonname'.service' >> $configscript
+echo '	echo "Fan always on."' >> $configscript
+echo '	exit' >> $configscript
+echo 'elif [ $newmode -eq 2 ]' >> $configscript
+echo 'then' >> $configscript
+echo '	echo "Please provide fan speeds for the following temperatures:"' >> $configscript
+echo '	echo "#" > $daemonconfigfile' >> $configscript
+echo '	echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
+echo '	echo "#" >> $daemonconfigfile' >> $configscript
+echo '	echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
+echo '	curtemp=55' >> $configscript
+echo '	while [ $curtemp -lt 70 ]' >> $configscript
+echo '	do' >> $configscript
+echo '		errorfanflag=1' >> $configscript
+echo '		while [ $errorfanflag -eq 1 ]' >> $configscript
+echo '		do' >> $configscript
+echo '			echo -n ""$curtemp"C (0-100 only):"' >> $configscript
+echo '			curfan=$( get_number )' >> $configscript
+echo '			if [ $curfan -ge 0 ]' >> $configscript
+echo '			then' >> $configscript
+echo '				errorfanflag=0' >> $configscript
+echo '			fi' >> $configscript
+echo '		done' >> $configscript
+echo '		echo $curtemp"="$curfan >> $daemonconfigfile' >> $configscript
+echo '		curtemp=$((curtemp+5))' >> $configscript
+echo '	done' >> $configscript
+
+echo '	sudo systemctl restart '$daemonname'.service' >> $configscript
+echo '	echo "Configuration updated."' >> $configscript
+echo '	exit' >> $configscript
+echo 'fi' >> $configscript
+
+echo 'echo "Please provide fan speeds and temperature pairs"' >> $configscript
+echo 'echo' >> $configscript
+
+echo 'loopflag=1' >> $configscript
+echo 'paircounter=0' >> $configscript
+echo 'while [ $loopflag -eq 1 ]' >> $configscript
+echo 'do' >> $configscript
+echo '	errortempflag=1' >> $configscript
+echo '	errorfanflag=1' >> $configscript
+echo '	while [ $errortempflag -eq 1 ]' >> $configscript
+echo '	do' >> $configscript
+echo '		echo -n "Provide minimum temperature (in Celsius) then [ENTER]:"' >> $configscript
+echo '		curtemp=$( get_number )' >> $configscript
+echo '		if [ $curtemp -ge 0 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			errortempflag=0' >> $configscript
+echo '		elif [ $curtemp -eq -2 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			errortempflag=0' >> $configscript
+echo '			errorfanflag=0' >> $configscript
+echo '			loopflag=0' >> $configscript
+echo '		fi' >> $configscript
+echo '	done' >> $configscript
+echo '	while [ $errorfanflag -eq 1 ]' >> $configscript
+echo '	do' >> $configscript
+echo '		echo -n "Provide fan speed for "$curtemp"C (0-100) then [ENTER]:"' >> $configscript
+echo '		curfan=$( get_number )' >> $configscript
+echo '		if [ $curfan -ge 0 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			errorfanflag=0' >> $configscript
+echo '		elif [ $curfan -eq -2 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			errortempflag=0' >> $configscript
+echo '			errorfanflag=0' >> $configscript
+echo '			loopflag=0' >> $configscript
+echo '		fi' >> $configscript
+echo '	done' >> $configscript
+echo '	if [ $loopflag -eq 1 ]' >> $configscript
+echo '	then' >> $configscript
+echo '		if [ $paircounter -eq 0 ]' >> $configscript
+echo '		then' >> $configscript
+echo '			echo "#" > $daemonconfigfile' >> $configscript
+echo '			echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
+echo '			echo "#" >> $daemonconfigfile' >> $configscript
+echo '			echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
+echo '		fi' >> $configscript
+echo '		echo $curtemp"="$curfan >> $daemonconfigfile' >> $configscript
+echo '		' >> $configscript
+echo '		paircounter=$((paircounter+1))' >> $configscript
+echo '		' >> $configscript
+echo '		echo "* Fan speed will be set to "$curfan" once temperature reaches "$curtemp" C"' >> $configscript
+echo '		echo' >> $configscript
+echo '	fi' >> $configscript
+echo 'done' >> $configscript
+echo '' >> $configscript
+echo 'echo' >> $configscript
+echo 'if [ $paircounter -gt 0 ]' >> $configscript
+echo 'then' >> $configscript
+echo '	echo "Thank you!  We saved "$paircounter" pairs."' >> $configscript
+echo '	sudo systemctl restart '$daemonname'.service' >> $configscript
+echo '	echo "Changes should take effect now."' >> $configscript
+echo 'else' >> $configscript
+echo '	echo "Cancelled, no data saved."' >> $configscript
+echo 'fi' >> $configscript
+
+sudo chmod 755 $configscript
+
+
+sudo systemctl daemon-reload
+sudo systemctl enable $daemonname.service
+
+sudo systemctl start $daemonname.service
+
+if [ -d "/home/pi/Desktop" ]; then
+	sudo wget http://download.argon40.com/ar1config.png -O /usr/share/pixmaps/ar1config.png
+	sudo wget http://download.argon40.com/ar1uninstall.png -O /usr/share/pixmaps/ar1uninstall.png
+	# Create Shortcuts
+	shortcutfile="/home/pi/Desktop/argonone-config.desktop"
+	echo "[Desktop Entry]" > $shortcutfile
+	echo "Name=Argon One Configuration" >> $shortcutfile
+	echo "Comment=Argon One Configuration" >> $shortcutfile
+	echo "Icon=/usr/share/pixmaps/ar1config.png" >> $shortcutfile
+	echo 'Exec=lxterminal -t "Argon One Configuration" --working-directory=/home/pi/ -e '$configscript >> $shortcutfile
+	echo "Type=Application" >> $shortcutfile
+	echo "Encoding=UTF-8" >> $shortcutfile
+	echo "Terminal=false" >> $shortcutfile
+	echo "Categories=None;" >> $shortcutfile
+	chmod 755 $shortcutfile
+	
+	shortcutfile="/home/pi/Desktop/argonone-uninstall.desktop"
+	echo "[Desktop Entry]" > $shortcutfile
+	echo "Name=Argon One Uninstall" >> $shortcutfile
+	echo "Comment=Argon One Uninstall" >> $shortcutfile
+	echo "Icon=/usr/share/pixmaps/ar1uninstall.png" >> $shortcutfile
+	echo 'Exec=lxterminal -t "Argon One Uninstall" --working-directory=/home/pi/ -e '$removescript >> $shortcutfile
+	echo "Type=Application" >> $shortcutfile
+	echo "Encoding=UTF-8" >> $shortcutfile
+	echo "Terminal=false" >> $shortcutfile
+	echo "Categories=None;" >> $shortcutfile
+	chmod 755 $shortcutfile
+fi
+
+
+echo "***************************"
+echo "Argon One Setup Completed."
+echo "***************************"
+echo 
+if [ -d "/home/pi/Desktop" ]; then
+	echo Shortcuts created in your desktop.
+else
+	echo Use 'argonone-config' to configure fan
+	echo Use 'argonone-uninstall' to uninstall
+fi
+echo
\ No newline at end of file